Download
- Date 2025.01.15
Welcome to DPC-20 Servo Actuator Test/Programmer
Thank you for choosing DPC-20, the versatile Servo Actuator Test/Programmer designed for easy access and user-friendly operation.
About DPC-20
The DPC-20 is an integrated programmer capable of testing and configuring Servo Actuators using PWM, TTL, RS485, and CAN communication protocols. Unlike traditional programmers, DPC-20 offers a unified platform to seamlessly interact with various Servo Actuator series.
Features:
- Compatible with PWM, TTL, RS485, and CAN communication protocols.
- Supports testing and configuration of a wide range of Hitec Servo Actuator series.
Software Downloads
Please find below the UI programs available for download, compatible with various Hitec Servo Actuator series:
| Servo Actuator Series | Compatible Interface | UI Program | DPC UI HUB | Support Page |
|---|---|---|---|---|
| HS-5/7 Series | DPC-11, DPC-20 | DPC UI | Download | Support Page |
| HSB-9 Series | DPC-11, DPC-20 | |||
| D/MD Series | DPC-11, DPC-20 | |||
| D/MD-485 Series | DPC-485, DPC-20 | |||
| CAN Series | DPC-CAN, DPC-20 | AIO (All In One) UI |
Important Information
DPC-20:
- Hardware Type: PC USB-C to 3-pin (PWM/TTL) and 4-pin (RS485/CAN) interface.
- Capable of configuring and testing HITEC Digital Servo Actuators.
- Compatible with various control methods (PWM, RS485, CAN), offering a seamless transition from legacy DPC-11, DPC-485, and DPC-CAN units.
- Different Servo Actuator series require dedicated UI programs due to variations in communication protocols.
To test and configure Servo Actuators using the DPC-20, ensure you connect the appropriate power supply to the DPC-20 for the connected Servo Actuator.
(For servo actuators requiring more than 18V or the current exceeds 3A, please connect the power directly to the servo, not through the DPC-20.)
For Servo Actuators (5/7 Series, 9 Series, D/MD Series), connect to the 3-pin port on the DPC-20, and connect the power supply to the BAT- and BAT+ pins on the 4-pin port, paying careful attention to polarity.
For Servo Actuators (D/MD-485 Series, CAN Series), connect to the 4-pin port on the DPC-20, and connect the power supply to the BAT- and BAT+ pins on the 3-pin port, paying careful attention to polarity.
DPC-20 Wiring Diagrams
DPC-20 wiring can be categorized based on whether it uses 3Pin or 4Pin connections and whether the power is supplied to the servo via the DPC-20 or directly. For any voltage exceeding 18V or current exceeding 3A, use the direct connection method to prevent damage or malfunction.
1. 3Pin Connection via DPC-20
2. 3Pin Direct Connection
3. 4Pin Connection via DPC-20
4. 4Pin Direct Connection
Note - DPC-485:
- For non-D/MD-485 series, a dedicated UI may be required.
- When using DPC-20 as a replacement, simply connect to USB, wait for approximately 20 seconds, then open the COM port to resume normal operation.
DPC UI:
- Suitable for configuring and testing 5/7 Series, 9 Series, D/MD Series, and D/MD-485 Series Servo Actuators.
AIO (All In One) UI:
- Ideal for configuring HITEC CAN Servo Actuators (CAN & DroneCAN protocols), conducting basic operation tests, and firmware updates.
- Supports simultaneous connection of multiple Servo Actuators.
- Note: For units with firmware versions below 1.7 or without ID settings, connect only one unit at a time.
- Requires Microsoft DotNet Framework 4.
- Initial support introduced in DPC-20 version 2023_06_14, latest version recommended.
We sincerely appreciate your continued support and thank you for using our products!
